Screw Conveyor Auger Screw Powder Conveyor Stainless Steel 114-219mm 6m Lift OEM Custom

Conveying fine powder through a standard screw conveyor without leaking, clumping, or contaminating the product stream is a daily engineering challenge. This stainless steel screw conveyor is built for powder materials, with a sealed tube body, precision-machined auger flights, and pipe diameter options from 114mm to 219mm.

1. Sealed Tube Design for Dust-Free Powder Conveying:

The enclosed tube body prevents powder from escaping during transfer, keeping your facility clean and eliminating product loss from airborne dust. Inlet and outlet connections seal directly to upstream and downstream equipment without open transfer points.

2. Four Pipe Diameters for Any Throughput:

Pipe diameter options of 114mm, 141mm, 159mm, and 219mm cover the full range from small-batch lines to high-volume production. Larger diameters move more material per revolution at the same motor speed, allowing throughput to scale without changing the machine type.

3. Handles a Wide Range of Powder Materials:

The conveyor transfers flour, starch, seasoning powder, chemical powder, calcium carbonate, talc, and similar dry bulk powders without bridging or dead zones. Auger flight geometry and pitch are configurable to match your powder bulk density and flow characteristics.

4. Horizontal Transfer or Inclined Lift Up to 6 Metres:

The conveyor operates horizontally or at an incline with up to 6 metres of vertical lift, covering both flat transfer and elevation requirements without pneumatic conveying equipment.

5. Full OEM Customisation:

Pipe diameter, length, inlet and outlet position, motor power, and surface finish are all configurable. Send your layout and material spec and we confirm the design.